Table of Contents
Advertisement
Set and Change Password:
Select Change Password from the System recovery password Setup menu and press
<Enter>. "Enter New Password" appears. Type the password and press <Enter>. The
screen does not display the characters entered. Retype the password as prompted and
press <Enter>. If the password confirmation is incorrect, an error message appears.
The password is stored in NVRAM upon completion.
USB Configuration
Under the "Advanced" tab, use the éê keys to move cursor for selecting the options
and enable or disable by pressing <Enter> for USB options as needed.
BIOS Setup Utility & MLUA
5-7
Advertisement
Table of Contents
