Table of Contents
Advertisement
Power Management Problems
The computer does not enter standby/sleep mode automatically.
When your computer is connected to another device, it may not enter standby/sleep
l
mode if the connection is actively in use.
Make sure the standby/sleep time-out is enabled.
l
The computer does not enter standby/sleep mode immediately.
If the computer is busy performing tasks, it will only enter standby/sleep mode after
l
completing the tasks.
The computer does not resume from standby/sleep mode.
The computer automatically enters standby/sleep mode when the battery pack drops
l
to 3% of being fully discharged. Perform one of the following:
Connect the AC adapter to the computer.
Replace the empty battery pack with a fully charged one.
The computer does not enter sleep mode with the Fn+F10 hot keys.
Make sure the sleep function is specified on the sleep button.
l
Software Problems
An application program does not work correctly.
Make sure the software is correctly installed.
l
If an error message appears on the screen, consult the software' s documentation for
l
further information.
If you are sure the operation has stopped, reset the computer. (See "Resetting the
l
Computer" later in this chapter.)
Use "Task Manager" by pressing Ctrl+Alt+Del to close the error application.
l
8-12
Troubleshooting
Advertisement
Table of Contents
