Table of Contents
Advertisement
Temperature tab displays the following temperature readings from different sensors located on
the system:
Processor Temperature
o
LCD Display Temperature
o
System Temperature
o
Hard Disk Drive Temperature
o
Primary Battery Temperature
o
Secondary Battery Temperature
o
Battery tab allows user to select the most frequently used battery charger profile which defines
the battery calibration cycle.
This WLAN Device tab displays the name of the built-in WLAN module, and it allows user to
turn ON or OFF the built-in WLAN module. By default, setting is OFF.
This Speaker Output tab allows user to define the notebook speaker behavior.
General Guidelines
Below are the general guidelines on how to use the ML User Application:
Click on the OK button to save changes and close the ML User Application window.
Click on the Cancel button to discard changes and close the ML User Application.
Click on the Apply button to save changes and keep the ML User Application window
remained open.
Click on the Get Default Value button to reset option to its default value.
Click on the Help button to show the Help Content for the ML User Application.
Note:
Changing on ML User Application parameters will impact the ML Administrator Application
configuration that has connection with ML User Application and vice versa
Specific details on the MLUA application and the settings that can be addressed are
explained in more details in the On-line Help that accompanies the application.
BIOS Setup Utility & MLUA
5-15
Advertisement
Table of Contents
