When And How To Use The Bios Setup Utility; When To Use; Starting Bios Setup; Moving Around And Making Selections - Motorola ML910 User Manual

When and How to Use the BIOS Setup Utility

When to Use

You need to run the BIOS Setup Utility when:
You see an error message on the screen requesting you to run Setup.
l
You want to restore the factory default settings.
l
You want to modify some specific settings of the hardware.
l
You want to modify some specific settings to optimize system performance.
l

Starting BIOS Setup

NOTE:
1. The Setup screens shown in this chapter are for your reference only. The actual items or
settings on your computer may differ.
2. The Setup utility may have been updated after the publication of this user guide.
3. The settings you select in your operating system might override similar settings in the Setup.
To run BIOS Setup, press F2 when the prompt appears in the low er left corner of the
screen during system startup. The prompt shows up on the screen for only 1 second.
You must press F2 quickly. The BIOS Setup menu appears as shown below.

Moving Around and Making Selections

A brief description of keyboard usage is listed next:
5-2 BIOS Setup Utility & MLUA