Power Source - Emerson CD Cruiser HD2700 Owner's Manual

This CD player can be operated on either 120V 60Hz AC house current with the
AC adapter (not included), or on 3V DC (2 "AA" batteries, not included).
AC OPERATION
Connect an optional AC adapter (not included) to your 120V 60Hz AC outlet. Then
connect the small plug to the "DC IN 4.5V" jack on the side of the player as shown
in the following illustration.
If you decide to purchase an AC adapter for this unit, it must have the following
specifications:
Input: 120V/ 60Hz AC.
Output: 4.5V DC 500mA.
The adapter must have a female-type plug with a positive center:
• Be sure the adapter is UL listed. If you use a "Universal"-type adapter, be sure
to set the output selector to "DC 4.5V".
• If the AC adapter will not be used for an extended period of time, remove it from
the wall outlet by pulling on the adapter housing. Do not remove the adapter by
pulling on the cord. Do not touch the AC adapter with wet hands.
HD2700_ib.p65

POWER SOURCE

DC 4.5V
Input Jack
Positive (+)
5
5
AC 120V 60Hz
Outlet
AC / DC Adapter
(Optional)
Negative (–)
21/11/2001, 15:46