Related Manuals for Emerson HD2850
Summary of Contents for Emerson HD2850
- Page 1 PERSONAL COMPACT DISC PLAYER with 45 SECOND ANTI-SKIP MEMORY OWNER’S MANUAL HD2850 Visit our web site at www.emersonradio.com 8/10/01, PM 03:50 HD2850_ib.p65...
- Page 2 Thank you... For purchasing this Emerson Personal CD Player. It has a 24 track programmable memory so you can listen to the songs on your favorite CD's in any order you choose. Or you can use the Random playback feature and let the player select the playback order for you.
-
Page 3: Important Notes
IMPORTANT NOTES WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Avoid installing the unit in locations described below: • Places exposed to direct sunlight or lose to heat radiating appliances such as electric heaters. -
Page 4: Location Of Controls
LOCATION OF CONTROLS 1. DBBS (Bass Boost) ON/OFF Switch - Switch On to increase bass response. 2. VOLUME Control – Raises or lowers the volume. 3. PHONES (Headphone) Jack – Connect stereo headphones, included, to this jack. 4. LINE OUT Jack – To connect this CD player to an external amplifier or recording device. -
Page 5: Lcd Display Indicators
LCD DISPLAY INDICATORS 1. INTRO Indicator – Appears when Intro playback mode is selected. 2. RAND (Random) Indicator – Appears when Random playback mode is selected. 3. PROG (Program) Indicator – Appears when programming tracks or playing programmed tracks. 4. Track Number Display – Shows the track which is being played, and the total tracks on the disc. -
Page 6: Power Source
This CD player can be operated on either 120V 60Hz AC house current with an optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included). BATTERY OPERATION 1. Open the battery compartment door on the bottom cabinet by sliding it in the direction of the arrow and then lifting it open. - Page 7 AC OPERATION (Adapter not included) Connect the AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the back of the player as shown in the following illustration. NOTE: This optional AC adapter, should be rated as follows: Input: 120V/ 60Hz AC Output:...
-
Page 8: Normal Playback
OPERATING INSTRUCTIONS NORMAL PLAYBACK 1. Connect the headphones to the PHONES jack. Set the VOLUME control to a low level before you begin playback and then adjust the volume to a comfortable level after playback begins. 2. Slide the CD Door OPEN switch to the right to release the lock and open the CD Door. -
Page 9: Pause Control
PAUSE CONTROL Press the PLAY/PAUSE button during playback to pause momentarily. The sound stops, the track and the time display flashes but the disc continues to spin. Press the PLAY/PAUSE pause and resume playback. The sound returns and the display stops flashing. SKIP/SEARCH CONTROLS To skip forward or backward to another track during playback press the SKIP FWD... -
Page 10: Intro Scan
INTRO SCAN This feature plays only the first 10 seconds of each track on the disc. 1. Press PLAY/PAUSE button to begin playback. 2. When playback begins press the MODE button 3 times.The “INTRO” indicator flashes in the display. 3. Press the STOP button to stop the disc and then press the PLAY/PAUSE indicator stops flashing and remains ‘On’. -
Page 11: Programmed Playback
PROGRAMMED PLAYBACK You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 24 tracks can be programmed. You may program certain tracks to play more than once if desired. IMPORTANT: The player can only be programmed when it is in the Stop mode and the total number of tracks and playing time appear on the display. - Page 12 ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with an automatic 45 second Electronic Anti-Skip Memory and an Anti-Rolling Mechanism that will eliminate virtually all skipping under normal conditions. When you press the PLAY/PAUSE button to begin playback the player immediately begins to store 45 seconds of music in a solid state memory that is impervious to shock.
-
Page 13: Care And Maintenance
CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. -
Page 14: Troubleshooting Guide
‘Care and Maintenance’ Reinsert headphone plug correctly. Raise volume controls on main unit and/or headphone cable. Replace batteries. Try another disc. Clean or replace disc. PLEASE CALL: 1-800-898-9020 Emerson Radio Corp. Consumer Affairs Dept. 1901 Diplomat Drive, 8/10/01, PM 03:49... -
Page 15: Limited Warranty
EMERSON RADIO CORP. LIMITED WARRANTY What does this warranty cover ? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? For a period of ninety (90) days from the date of original purchase in the U.S. - Page 16 EMERSON RADIO CORP. EMERSON PART NO. : 16-2832 108-01 PRINTED IN CHINA 800.898.9020 8/10/01, PM 03:50 HD2850_ib.p65...