Battery Operation; Battery Replacement - Emerson CD Cruiser HD2700 Owner's Manual

BATTERY OPERATION

1. Open the battery compartment door on the bottom
cabinet by sliding it in the direction of the arrow and
then lifting it open. To prevent loss, the door cannot
be removed from the unit.
2. Insert 2 "AA" batteries (not included) into the
compartment. Use alkaline batteries for longest life.
Follow the polarity markings inside the compartment.
If the batteries are inserted incorrectly the unit will not
work.
NOTE:
In order to operate the player on batteries, the optional AC adapter must be
disconnected from the DC IN jack.

BATTERY REPLACEMENT

When the batteries become too weak the battery level indicator begins to flash
and operation may become erratic. When this occurs replace the batteries
immediately.
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or
old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture (Follow battery manufacturer's directions.)
HD2700_ib.p65
BATTERY PRECAUTIONS
6
6 21/11/2001, 15:46