Configuring The Base Station; Changing The Base Station Position - Datalogic Gryphon I GM4100 Quick Reference Manual

Configuring the Base Station

Configuring the Base Station
The base charger/station may be configured in desk application to
hold the reader in two different positions, either a horizontal or
standing position, in order to provide the most comfortable use
depending on needs.

Changing the Base Station Position

The base station is configured by installing one of two sets of me-
chanical parts that come with the cordless kit. The default mounts
(shown below) provide three options: vertical (wall) mounting,
standing (45°), or horizontal mounting with a higher mechanical
retention of the scanner. Use the other mounts only for horizontal
mounting, with lower retention of the scanner. The different
parts may be interchanged to customize retention preferences.
1. Insert the appropriate parts for the desired base station
position, as shown below.
Standing,
Horizontal
or Vertical
12
Standing
A tool such as a rigid pen or a flat screwdriver can be used
to change the mounts. Do not allow it to touch the con-
tacts.
Horizontal
Horizontal
Only
Gryphon™ I GM4100