Connecting The Base Station; Securing The Dc Power Cord (Optional) - Datalogic Gryphon I GM4100 Quick Reference Manual

Configuring the Base Station

Connecting the Base Station

Figure 1 shows how to connect the Base Station to a terminal, PC
or other host device. Turn off the host before connection and con-
sult the manual for that equipment (if necessary) before proceed-
ing. Connect the interface cable before applying power to the Base
Station.
Gryphon Mobile can also be Powered by the Terminal. The
external power supply is recommended but not necessary.
When powered by the Terminal, the battery charger is
automatically set as Slow charge.
NOTE
Base Station Connection and Routing:
ble and Interface (I/F) Cable connectors into their respective ports
in the underside of the Base Station (see Figure 1). Then connect
to an AC Adapter, and plug the AC power cord into the (wall)
outlet.
Figure 1. Connecting the Base Station

Securing the DC Power Cord (Optional)

The DC power cord for the adapter can be secured to the bottom
of the base in order to maximize the mechanical retention of the
cable itself. The routing of the power cord can be changed to ac-
commodate the base station positioning: horizontal, stand or wall
mounting. The cables can be looped around to the front of the
Base Station, or fed directly out the back of the Base Station, as
shown in Figure 2 on page 15.
14
I/F Cable
DC Power
Cord
Base
Station
Fully insert the Power Ca-
Wall plug
Connector
AC/DC
Adapter
Gryphon™ I GM4100