Initial Setup; Rs232 Interface Selection - Datalogic Gryphon D432 Reference Manual

4

INITIAL SETUP

This procedure allows setting up the reader to operate with the default settings:
Whenever you need to change the default values refer to par. 5.2.
4.1

RS232 INTERFACE SELECTION

The Gryphon™ D432/D432E reader requires the RS232 interface cable and the
AC/DC power adapter to be connected.
To install and configure your reader with the RS232 interface, follow these
instructions:
Make all system connections as shown in Figure 3:
1.
2. Read the restore default parameter code below:
3. Read the RS232 interface selection code:
4. Power up your PC.
RS232 is the default interface set at the factory.
Figure 3 - RS232 Connection
Restore Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
RS232
AMHKHMFOHNGNENEIEPANHOGOCK
AGPEPJAMDKEOFMHMLJAKFEHFKK
AMGNPJCJGIIJCMCEGJMHNDOLLK
AIFBJLBGMHPLNKECPCGMBBIBOK
AAPHBAJJDAAGMGKDDAOHBGGLHK
AEKFBONJCDDIECLFJIJKMCHLIK
DLDDLDLDLLDLLLLDLLDDDLDLLL
INITIAL SETUP
11