Mismatch Result - Datalogic Gryphon D432 Reference Manual

5.3.4

Mismatch Result

The result of each format may be set in case the match conditions previously
selected are not satisfied.
Once the desired formats have been enabled and a code has been read, the results
corresponding to each format will be concatenated together and transmitted in the
output message. For this reason, it is strongly advised to set the mismatch result for
each format.
Example
Decoded Code: <DATALOGICproduct>
Format definition:
Format Enable/Disable
Format 1 Enabled
Format 2 Disabled
Format 3 Enabled
Format 4 Enabled
Format 5 Enabled
Output message: <DATDATALOGICproductDATALO789GICproductDATALOGICproduct>
Format 1 Format 3
Mismatch Result
AOCLFLHODNGNENEIEPANHOGOCK
AHPNIJAMDKEOFMHMLJAKEFGEIK
AKCBPJCJGIIJCMCFHPJPBJONNK
AEFBJLBGMHPKMJGONHLFIIIHGK
AAPHBAJJCDBDNKDEDGEINLGHBK
AFLFAMLJPMLKOLLPNDLGCBAIIK
DLDLLDLDDLLLLLLDDDLDDLDLDL
CONFIGURATION USING CODE SYMBOLS
Match Condition
Code having a length
of 16 characters
/
Code having a length
of 25 characters
Code having
substring "AT"
position 2
Code belonging to the
PDF417 symbology
Define Mismatch Result
Read the above code and:
1. read a number in the range 1-5 corresponding to the
desired format number;
2. 0 = empty string as output
1 = unformatted read code as output.
Function
Select field from
position1
position3
/
Substitute string
"ab" with string
"12"
the Insert string
in "789" in position
7
Delete string
"DA" and "pr"
Format 4
Mismatch Result
No string
to
/
Unformatted read
code
Unformatted read
code
Unformatted read
code
Format 5
115