Datalogic Gryphon D432 Reference Manual page 26

GRYPHON™ D432/D432E
Green LED off
BEEP OK
Successive start-ups will automatically recognize the previously loaded drivers. If
external power is used, verify that external power is already supplied.
BEEP OK
14
FIRST START-UP
Green LED blinks
Disconnect reader
at Host
Connect external
power supply to
cable and power up
Reconnect reader
cable to Host and
close dialog box
SUCCESSIVE START-UPS
Green LED blinks
Disconnect reader at Host
Connect external power supply to
cable and power up
Reconnect reader cable to
Host and close dialog box
Connect
Gryphon™ D432/D432E to Host
Load drivers
(if requested)
Does a dialog
YES
box appear
warning that Bus
power is not
sufficient?
NO
Green LED off - BEEP OK
Select desired USB
interface code
(USB-KBD is default)
Load drivers
(if requested)
Read test codes.
Reader is READY
Connect Gryphon™ D432/D432E
to Host
YES
Does a dialog box
appear warning
that Bus power is
not sufficient?
NO
Green LED off - BEEP OK
Read test codes.
Reader is READY
1.
2.