Emerson HD9971 Owner's Manual page 10

"Point A" To "Point B" Repeat
1.) Press the PLAY/PAUSE
button to advance the player until it is close to the point where you want to
begin repeating (Point A).
2.) Press the REPEAT button 3 times until
the "RPT" (Repeat) indicator stays on
and the "A " indicator is flashing.
3.) When you reach the point where you want to
begin repeat playback, press the PLAY/
PAUSE button once. The "A
stays "On" and the "B" indicator begins to
flash.
4.) When you reach the point where you want to
end repeat playback, press the PLAY/PAUSE
button once more. The "B" indicator stops
flashing and remains "On". The player will
begin repeating the portion of the disc between your selected points A and B.
TO CANCEL REPEAT PLAY MODES
• Press the REPEAT button until all of the repeat indicators are ' Off' .
• Pressing the STOP
playback modes.
HD9971_ib_drafts.p65
button to start the disc and use the SKIP/SEARCH
" indicator
button or opening the CD door also cancels the repeat
9
9 19/4/2002, 15:52