Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is designed to ease the task of setting up and configuring security
on a wireless network. There are two methods used in the WPS as below instruction.
Push Button Config (PBC)
There are 2 ways on how to initialize WPS Push Button Config (PBC), follow the steps below :
Wireless utility:
-Open the utility and select "Wi-Fi Protected Setup" tab.
-Click on "Push Button Config (PBC) button
-Log into your wireless access point's user interface and start the access point's WPS push
button configuration. Please refer to the wireless access point's manual on how to initialize
WPS Push Button Config.
Note: Most wireless access points have a physical WPS button. Pressing the button will
initialize WPS Push Button Config.
Physical button:
-Press the WPS button on the wireless adapter for 3 seconds and let go.
12