Installation; Software Installation; Hardware Installation - TRENDnet TEW-805UB Quick Installation Manual

TRENDnet User's Guide

Installation

Software Installation

This section describes how to install the driver and utility for the AC1200 Dual Band
Wireless USB Adapter.
1. Insert the Utility and Driver CD-ROM into your computer's CD-ROM Drive and then
click Install Utility.
2. Follow the InstallShield Wizard Instructions
3. Click Finish to complete installation if prompted for computer restart the computer
click OK.
© Copyright 2013 TRENDnet. All Rights Reserved.

Hardware Installation

1. Plug the AC1200 Dual Band Wireless USB Adapter into an available USB slot on your
computer.
Note: Plug the device into an available USB 3.0 port for maximum performance.
2. Verify that the LED is turned on. Continue to the next section on how to configure
that wireless adapter.
TEW-805UB
3