D-Link DCS-5220 - Wireless Pan/Tilt Internet Camera Network User Manual page 8

Section 1 - Product Overview
DC Power Connector
The DC Power input connector is labeled DC 12V with a single jack
socket to supply power to the DCS-5220.
Ethernet Cable Connector
The DCS-5220 features a RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling. The port supports the NWay protocol, allowing the DCS-5220 to automatically detect or negotiate
the transmission speed of the network.
Reset Button
When the reset button is pressed, the power and activity LED light will both
appear steady on. While pressing the reset button both LEDs will begin to
flash, indicating that the DCS-5220's settings are now restored to factory
default. Release the reset button.
D-Link DCS-50 User Manual