Log - D-Link DCS-5220 - Wireless Pan/Tilt Internet Camera Network User Manual

Section  - Configuration
The content of the log file reveals useful information about the current configuration and connection logged after the
DCS-5220 starts up.
Enable remote log: This option enables the camera to send
camera log files to a remote server.
IP Address: The IP address of the remote server.
Port:
The port number of the remote log server.
The default port is 514.
Current log:
View the system log file. The content of the
file reveals useful information about camera
configuration and connectivity status after
the camera boots up.
D-Link DCS-50 User Manual

Log