Enabling Upnp For Windows ® Xp - D-Link DCS-5220 - Wireless Pan/Tilt Internet Camera Network User Manual
User manual
Hide thumbs
Also See for DCS-5220 - Wireless Pan/Tilt Internet Camera Network:
- Specifications (2 pages) ,
- User manual (108 pages) ,
- Quick install manual (25 pages)
Table of Contents
Advertisement
Section - Configuration
Enabling UPnP for Windows
XP
®
UPnP (Universal Plug and Play) is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. The
DCS-5220 is an UPnP enabled Internet camera. If your operating system is UPnP
enabled, the device will be easier to configure. If you do not want to use the UPnP
functionality, it can be disabled by unchecking the Enabled UPnP checkbox in
the Advanced > Network page (see page 32). Use the following steps to enable
UPnP settings only if you are running Windows
XP. If you are running Windows
®
®
98/2000, UPnP is not available.
Go to Start > Settings. Click Control Panel.
Click Add or Remove Programs
D-Link DCS-50 User Manual
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DCS-5220 - Wireless Pan/Tilt Internet Camera Network and is the answer not in the manual?