Setting The Video Output Parameters; Setting The Gracenote Cddb Connection - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual

Setting the video output parameters

You can change the manner in which the MusicCAST outputs the on-screen display to the TV/monitor. You can
set it to always output the display, or to automatically turn the display off when you are not using it.
1 Follow the procedure described on page 117
"Opening the system setting screens" to
display the System Setup screen.
2 Use / to move the cursor to "Video Out" and
press SELECT.
The Video Out screen appears on the on-screen display.
3 Select the output type:
• "Always output the on-screen display"
The MusicCAST server always outputs the on-screen
display.
• "Only show on-screen display during operation"
The MusicCAST server turns the on-screen display off if
you do not use it for a specified period of time.
To change the delay before the MusicCAST server turns the
on-screen display off, use
the "Delay before halting display" field and set the delay
time.

Setting the Gracenote CDDB connection

Set the way you want the MusicCAST server to use the Gracenote CDDB service to look for CD information.
1 Follow the procedure described on page 117
"Opening the system setting screens" to
display the System Setup screen.
/ / / to move the cursor to
When the MusicCAST server is set to only show the on-screen
display during operation, pressing and holding PLAY INFO.
for two seconds turns off the on-screen display. Press any key
to return the on-screen display to normal.
4 Use / / / to move the cursor to "OK" and
press SELECT.
The display returns to the System Setup screen.
Select "Cancel" to return to the System Setup screen without
changing any settings.
HINT HINT
Press BACK to return to the previous screen.
2 Use / to move the cursor to "Gracenote
CDDB" and press SELECT.
The Gracenote CDDB database screen appears on the
on-screen display.
119
System setup