Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual page 164

Musiccast series
Hide thumbs Also See for MCX 1000 - MusicCAST - Digital Audio Server:
Table of Contents

Advertisement

To automatically change the YAMAHA SURROUND
PROGRAMS on the AV receiver, you first need to register
surround information to the songs recorded on the MusicCAST
server (see page 91).
■ Tuner distribution setting
The MusicCAST server can distribute audio output from your
YAMAHA AV receiver tuner to MusicCAST clients. Each
MusicCAST client can select from the radio stations you have
set on the AV receiver (called "Tuner presets"). This function
does not work for units without a tuner.
Ensure that you set the ANALOG REC LEVEL control on the
front panel of the MusicCAST server to a level where you can
comfortably hear the tuner output.
Use the
/
to move the cursor to the option you wish to
select and press SELECT. To use the tuner in your AV receiver
with the MusicCAST server, connect the REC OUT or ZONE
2 OUT jacks on the AV receiver to the ANALOG IN jacks on
the MusicCAST server.
• REC OUT
The AV receiver outputs the audio signal from its tuner from
its REC OUT jacks.The input setting on your AV receiver
changes to TUNER when you use a MusicCAST clients to
select or change a tuner preset.
• ZONE 2 OUT
The AV receiver outputs the audio signal from its ZONE 2
OUT jacks.The ZONE 2 INPUT setting on your AV receiver
changes to TUNER when you use a MusicCAST client to
select or changes a tuner preset.
• Off
The function is inactive.
4 When you finish setting the parameters
described in the previous step, move the cursor
to "OK" and press SELECT.
The display returns to the System Setup screen.
Select "Cancel" to return to the System Setup screen without
changing any settings.
HINT
HINT
Press BACK to return to the previous screen.
123
System setup

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcx-a10

Table of Contents