Setting The Video Input/Output - Yamaha DVX-700 Owner's Manual

■ Setting the video input/output

Notes
– Make sure that you have completed all the
necessary connections (Refer to "Connecting a
TV" on page 17).
– If the settings you have selected are not
appropriate, you can reset DVD settings to the
initial factory settings (Refer to "System menu" on
page 57).
1 Press DVD/USB repeatedly until "DVD" appears in
the front panel display.
2 Turn on the TV and set to the correct video-in
channel.
→
You should see the background screen on the TV.
– Usually this channel is between the lowest and
highest channels and may be called FRONT, A/V
IN or VIDEO. See your TV manual for more
details.
– Or, you may go to channel 1 on your TV, then
press the Channel down button repeatedly until you
see the Video In channel.
– Or, the TV remote control may have a button or
switch that chooses different video modes.
Setting the TV display
Set the aspect ratio of the DVD controller according to the
TV you have connected. The format you select must be
available on the disc. If it is not, the TV display setting
will not affect the picture during playback.
TOP MENU
PRESET
INFO.
A-E ENTER
SETUP
TV/ STB
1 Press SETUP on the remote control.
DVD setup menu is displayed on the screen.
Play Mode
Initial Setting
2 Press
/ / /
highlight [Initial Settings], and then press ENTER.
Initial Setting
Video Output TV Screen
Language Component Out
Display HDMI Resolution
Options HDMI Color
3 Press
/ on the remote control to highlight
[Video Output], and then press ENTER.
GETTING STARTED
MENU
A-E
RETURN
CODE SET
CH
Video Adjust
Disc Navigator
on the remote control to
4:3 (Letter Box)
Interlace
720x480p
Component
23
3
En