Rear Panel - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual

Rear panel

1
1 VIDEO jacks
The MusicCAST server outputs its on-screen display to a TV/
monitor connected to its video output jacks.
NOTE
The MusicCAST server does not record any video signal.
Video signals from the S VIDEO IN and VIDEO IN jacks
are passed directly to the S VIDEO OUT and VIDEO OUT
jacks respectively, and are not processed in the
MusicCAST server at all.
• S VIDEO IN jack
Connects to the S VIDEO output from your video component
using an S VIDEO cable.
• S VIDEO OUT jack
Connects to the S VIDEO input on your TV/monitor using an S
VIDEO cable.
• VIDEO IN jack
Connects to the VIDEO output from the video component.
• VIDEO OUT jack
Connects to the video input on your TV/monitor.
2 LAN terminal
Connects to a network or switching hub using a LAN / CAT 5
cable.
• LINK indicator
Lights up when the MusicCAST server is connected to a local
area network.
• ACTIVE indicator
Lights up when the MusicCAST server is transmitting or
receiving data over a local area network.
3 Wireless LAN antenna
4 RS-232C terminal
Connects to the RS-232C terminal on your YAMAHA AV
receiver using a cross-type RS-232C cable to allow the
MusicCAST server to control certain functions on the AV
receiver.
2 3 4
7
5
5 AUDIO jacks
• OPTICAL (digital) IN jack
Connects to the optical digital output jack on an external
component to receive signals from the component over a
digital optical connection.
• OPTICAL (digital) OUT jack
Connects to the optical digital input jack on an external
component to transmit signals to the component over a digital
optical connection.
• COAXIAL (digital) IN jack
Connects to the coaxial digital output jack on an external
component to receive signals from the component over a
digital coaxial connection.
• COAXIAL (digital) OUT jack
Connects to the coaxial digital input jack on an external
component to transmit signals to the component over a digital
coaxial connection.
• ANALOG IN jacks
Connects to the analog output jacks on an external component
to receive signals from the component over an analog
connection.
• ANALOG OUT jacks
Connects to the analog input jacks on an external component to
transmit signals to the component over to end of an analog
connection.
6 FAN
7 HDD slot
8 AC power cord
13
Getting started
6
8