Wireless Lan Screen - Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual

Wireless LAN screen

Use this screen to set the wireless LAN parameters for
the MusicCAST system wireless network.
1 Carry out the procedure described on page 108
to display the Expert Settings screen on the on-
screen display.
2 Use / to move the cursor to "Wireless LAN"
and press SELECT.
The Wireless LAN screen appears on the on-screen display.
To set the ESSID and WEP parameters on this screen. Use
/ / to move the cursor to an appropriate field and press .
Then use the on-screen keyboard or a PS/2 keyboard to enter
the appropriate setting. Move the cursor to "OK" and press
SELECT to confirm your setting, or select "Cancel" and press
SELECT to exit the screen without making any changes.
To set the Channel parameter use
cursor to the appropriate field, then use
appropriate channel. Move the cursor to "OK" and press
SELECT to confirm your setting, or select "Cancel" and press
SELECT to exit the screen without making any changes.
NOTE
The MusicCAST server uses 128-bit encryption, which
requires a 13-digit WEP key. If you enter less than 13 digits,
the MusicCAST server automatically adds zeroes to the code
you set to make up the difference.
Configuring the MusicCAST network
/
/ / / to move the
/ to set the
111