Yamaha MCX 1000 - MusicCAST - Digital Audio Server Manual page 159

System setup
3 Set the date and time.
• To set the date and time manually
Remove the check from the "Use NTP server" checkbox,
and use / / / to move the cursor to the field you want
to set. Use / / / to change the setting.
• To connect to the NTP server and set the date and
time automatically
Place a check in the "Use NTP server" checkbox.
Use / / / to move the cursor to "Use NTP server" and
press . The character entry screen appears on the on-screen
display. Use this screen to enter the address of the NTP server.
Refer to the user's information guide from your Internet
provider or NTP service for this address. If may be an IP
address, or URL. If you want to use a URL, please confirm that
you have set the DNS setting of the MusicCAST server
correctly first (see page 108).
Refer to page 78 for an explanation of how to use the character
entry screen.
When you finish entering the address, use
the cursor to "OK" and press select. Select "Cancel" to return
to the Date/Time screen without changing any settings.
Use the same method to set your time zone, and the frequency
with which you want the MusicCAST server to access the NTP
server.
Use
field and use
the MusicCAST server to access the NTP server for time and
date updates.
Use
and use
If you are in a time zone that is using daylight saving, use
/
SELECT to place a check in the checkbox.
4 Use
press SELECT.
The on-screen display Returns to the System Setup screen.
Select "Cancel" to return to the System Setup screen without
changing any settings.
HINT
HINT
Press BACK to return to the previous screen.
• Check that the MusicCAST server is correctly connected to
the Internet when you attempt to connect it to the NTP server.
• You should set this parameter again if you disconnect the
MusicCAST server from the AC outlet for more than 1 minute.
• Disconnecting the MusicCAST server from AC power for
more than one minute causes the internal clock in the
MusicCAST server to become incorrect. Reset the date and
time parameters to the correct settings manually if you have
not connected your MusicCAST server to an NTP server.
/ / / to move
118
/ / / to move the cursor to the "Synchro. interval"
/ to set the time interval at which you wish
/ / / to move the cursor to the "Time zone" field
/ to select an appropriate time zone.
/ to move the cursor to "Daylight saving" and press
/ / /
to move the cursor to "OK" and
/