Lightolier Calculite C3MRL CCDFT Specification

Page 1 of 2
12 5/8"
(321mm)
Non-IC Frame:
Non-IC:
C3LV C3LV
C3LVE1
C3LVE1
C3LVE2
14 3/8"
C3LVE2
(365mm)
9 5/8"
(245mm)
Non-IC AirSeal Frame:
C3ALV
Non-IC AirSeal:
C3ALV
C3ALVE1
C3ALVE1 C3ALVE2
14 3/8"
C3ALVE2
(365mm)
10 1/8"
(257mm)
IC AirSeal Frame:
C3AICLV
11 3/16"
C3ALCLVE1
(284mm)
IC AirSeal:
C3AICLV C3AICLVE1
22 3/8"
(568mm)
Ceiling Cutout: 3 1/2" (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit
Cone Finish White Flange
Clear C3MRL CLW
Comfort Clear Diffuse C3MRL CCDW
C3MRL CCZW
Champagne Bronze
Gold C3MRL GDW
Matte White C3MRL WHW
Specular Black C3MRL BKW
Features
1. Trim Kit: Low brightness aperture cone; 0.040" aluminum, anodized; 50°
visual cut-off to lamp and lamp image. Cone keyed to kick reflector with
direction spread lens distribute light smoothly for vertical surface wall
washing. Captive lens during relamping. Hinged, and snaps on for easy
tool-less installation. Self-flange in painted white or aperture matching
polished flange. Flangeless trim used with Plaster Trim Ring accessory.
Interchangeable with other 3" Evolution trims.
2. Lamp Support: Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 1" diam-
eter accessories.
3. Cover Glass: High temperature, soft focus lens.
4. Thick Ceiling Ready Brackets: Die-form steel, matte black finish.
Adjust trim kit vertically to accommodate up to 2" thick ceiling, lockable.
5. Lampholder: Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon
leads.
6. Horizontal Adjustment Mechanism: Built-in ready for adjustable trim,
matte black finish.
7. Frame Vertical Adjustment Mechanism (C3LV): Accommodates
mounting to virtually any ceiling system using pre-installed mounting bars,
or 1/2" EMT tubing (by others). Single locking features secures all adjust-
ments. Alignment holes and markings allow fixture to be pre-set prior to
installation. Final adjustment can be made from below inside fixture.
8. Mounting Bars (C3LV): Galvanized steel, 0.048"; pre-installed telescop-
ing bars extend from 20" to 30" long and lock securely into position. Built-in
locking tabs provide positive attachment to common T-bar systems. Self-
centering feature simplified installation in 24"O.C. grid systems. Attaches
to steel or wood joists without accessories.
9. Transformer: Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-
voltage, core & coil. Electronic: 120V or 277V 50/60 Hz., regulated lamp
voltage, HPF, EMI and circuit protections, thermal auto-reset, quiet operation.
Spec. Sheet
Calculite
®
C3MRL
5" (127mm)
5 1/2"
(140mm)
5"
5" (127mm)
(127mm)
Plus Ceiling
Thk.
1/2"
14 5/8"
(13mm)
(372mm)
9" (229mm)
Polished Flange Flangeless
C3MRL CLP C3MRL CLFT
C3MRL CCDP C3MRL CCDFT
C3MRL CCZP C3MRL CCZFT
C3MRL GDP C3MRL GDFT
NA C3MRL WHFT
C3MRL BKP C3MRL BKFT
Evolution Lensed Wall Washer
11 4 2 5 3
2 7/8" (73mm) Dia.
4" (102mm) Dia.
C3LV
Flangeless Trim with
Plaster Ring Accessory
3 3/8" (86mm) Dia.
Frame-In Kit
C3LV
Non-IC
C3LVE1 Non-IC
C3LVE2 Non-IC
C3ALV Non-IC AirSeal
C3ALVE1 Non-IC AirSeal
C3ALVE2
Non-IC AirSeal
C3AICLV IC AirSeal
®
C3AICLVE1 IC AirSeal
®
Note: Magnetic not recommended for residential or noise sensitive areas.
Features (continued)
10. Frame-In Kit: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal
parts of the luminaire and must not be placed above luminaire in a manner
which will entrap heat.
IC AirSeal - Luminaire may be in direct contact with thermal insulation.
®
Labels
U.L. (Suitable For Wet Locations), I.B.E.W.
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W
for ceiling thickness greater than 1" (up to 2").

Options and Accessories

2" dia. Color Filters/Specialty filters: See ADF2/AF2 specification sheets
2" Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim): CA3FMR
Chicago Plenum: Consult Factory
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • F0711
3" Aperture, MR16 (12V)
6 7 9 8
2" (59mm) Max.
1
Ceiling Thk.
9"
(229mm)
9 1/2"
(242mm)
1/2" (13mm)
C3AICLV
Lamp*
Magnetic 120/277V 42W-65W MR16 (12V)
Electronic 120V 20W-65W MR16 (12V)
Electronic 277V 20W-65W MR16 (12V)
Magnetic 120/277V 42W-65W MR16 (12V)
®
Electronic 120V 20W-65W MR16 (12V)
®
® Electronic 277V 20W-65W MR16 (12V)
Magnetic 120 20W-50W MR16 (12V)
Electronic 120V 20W-50W MR16 (12V)
® - Insulation must be kept 3" away from any
Type:
www.lightolier.com
C3MRL
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)