Multifunctional Settings; Using The Menu Function - Hitachi CP-X251 User Manual – Operating Manual

Multifunctional settings

Multifunctional settings

Using the menu function

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN,
OPTION, and EASY MENU. EASY MENU consists of functions often used, and the
the same methods. The basic operations of these menus are as follows.
1. Press the MENU button on the remote control or one of
the cursor buttons on the projector.
The Advanced MENU or EASY MENU will appear.
In the EASY MENU
2.
If you want to change it to the Advanced MENU, select the
"Go to Advanced Menu"
3.
4.
In the Advanced MENU
2.
If you want to change it to the EASY MENU, select the
EASY MENU.
control, or the ENTER button on the remote control to select
an item. The display of the selected menu will be active.
3.
Then press the cursor button
on the remote control to progress. The operation menu of the selected item will appear.
4.
When you want to reset the operation, press the RESET button on the remote control
during the operation. Note that items whose functions are performed simultaneously
with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.
In the advanced menu, when you want to return to the previous display, press the cursor
button on the projector or remote control, or the ESC button on the remote control.
5.
Press the MENU button on the remote control again to close the menu
and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
when a certain input signal is displayed.
24
MENU button
ENTER button
Cursor buttons
RESET button
on the projector or remote control, or the ENTER button
VIDEO
ASPECT
POSITION MENU
MAGNIFY
ON
OFF
FREEZE
ENTER
POSITION
ESC RESET
ESC
SEARCH
RGB
AUTO BLANK
HOME PAGE UP VOLUME
PAGE DOWN MUTE
END
MY BUTTON KEYSTONE
1 2
MENU
ENTER
RESET