Basic Operation; Power On/Off - Hitachi 32LD9700U User Manual

BASIC OPERATION

Power On/Off

Now, turn On the main power to the unit. Make sure that the Power Cord is
plugged into the wall socket.
To turn On the power of the unit:
1. Press the Main Power switch on the unit.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote control.
The colour of the Indicating Lamp turns into Green, and the image will
display on the screen.
To turn Off the power of the unit:
1. Press Sub Power button either on the control panel or on the remote control.
The image disappears from the screen and the Indicating Lamp turns into
Red (Standby mode).
2. Press Main Power switch to completely turn Off the power of the unit.
Indicating Lamp
Status
Off
Red
Blinks in Red**
Green
Orange
Blinks in Orange**
* About Power Save mode, see "Power Save Mode" and "When Following Messages Appear on the Screen" on
70
for details.
and
**9700 models only
NOTE
If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on
It may help you to solve the problems.
You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a power cut during use of the unit.
20
The Indicating Lamp Status Check
Power Status
Off
Standby mode
Standby mode
On
Power Save mode*
Power Save mode
Main Power switch (on the bottom surface)
Sub Power button
Power Switch Status
Main power → Off
Main power → On
Sub Power button → Off
Standby mode as above
whilst upgrading DTT version and operating
Timer Programming on digital channel.
Main power → On
Sub power button → On
Main power → On
Sub Power button → On
Power Save mode as above
whilst upgrading DTT version and operating
Timer Programming on digital channel.
DTT/TV
SD MEMORY
CARD
PUSH-EJECT
P
P
Sub Power button
PH35814
68
70 72
.
~
OK