Setup Menu (Tv Mode) - Hitachi 32LD9700U User Manual

TV SETUP OPERATION (continued)

Setup Menu (TV mode)

With this menu, you can access various kinds of features relating to TV channel settings.
Selected Items
Country
Auto Tuning
Search
Position
Search
Descrambler
Manual Tuning
Name
Sound
System
Information
Use AV00 when connecting equipment such as a VCR via an RF (aerial type) cable.
( Page 1 )
Select the country where you watch TV so that it starts
( Page 2 )
auto-tuning for appropriate channels.
In case that some of the required channels are missed to
( Page 3 )
tune in, set the channels with Manual Tuning Operation.
( Page 4 )
Tune the local channels automatically.
Press button to start searching.
OK
Press channel up (+) down (-) buttons to input position
number (1~199, AV00) or channel number (C
CH
Select the channel entry method, and enter the digits for
channel you wish to watch.
S
Press button to start searching.
OK
MHz
Set this to Off normally. If it is set to On when selecting
Off
other than DTT in Scart Output, AV1 (Scart) terminal
operates as TV signal output, and the screen changes to
On
display AV1 (Scart) input signal automatically.
1. Move the cursor to the fi rst digit and select the letters
with button.
2. Move to the next digit with ► button.
3. Press
OK
letters.
The selectable letters are as follows: "0"~"9", "A"~"Z", "+",
" " (blank), "-" (displayed as blank), and "." (period).
L
L'
BG Select the sound system from 5 different modes.
I
DK
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Auto Off
Scart Output
Select OK Set
Setup hint
button again when you fi nish inputting all the
Off
TV
Return
or S ).
25