Basic Operation
Power On/Off
When you switched on power supply of the TV, the
power indicator lights up in red (standby mode).
To turn on the TV
1
or any Program Select
Press
,
/
buttons.
The power indicator lights in blue and the
TV turns on.
To turn off the TV
1
Press
.
The power indicator lights in red and the TV
turns off to standby mode.
•
It takes approximately 10 seconds for the picture to
appear after the TV is turned on.
•
The TV will switch to standby mode automatically if
there is no signal input for 10 minutes (for TV and
HDMI mode only).
•
If the TV will not be used for a long periods of time,
unplug the TV from the wall outlet.
Channel Selection
To select a channel
Press
/
or Program Select buttons to
1
select the channel number directly.
Input Source Selection
To select input source
Press
.
1
Press
to select the desired input source
2
(TV, AV1, AV, AV3, AV4, RGB, HDMI1,
HDMI, HDMI3).
The selected input source image displays.
•
AV1~4, HDMI1~3 and RGB can be selected directly
using the Direct Input Select buttons.
Volume Adjustment
To change the volume
Press
to increase the sound volume.
1
Press
to decrease the sound volume.
2
To mute the sound
1
Press
to temporarily turn off the sound.
2
Press
or
to restore the sound to
previous level.
•
You can decrease the sound volume by pressing
while the sound is muted.
On-Screen Display (OSD)
Selection and Adjustment
1
Press
to display the main menu.
2
Press
to select a menu.
The selected menu page displays.
3
Press
to set your selection.
4
Press
to choose an item on the menu
page and press
to set your selection.
5
Press
to adjust an item value or choose
options.
6
Press
to return to the menu, press
again to exit.
•
The OSD menu screen will be closed automatically
when no operation has been made for the set OSD
menu display time.
11