Picture Mode - Hitachi 32LD9700U User Manual

FUNCTION (continued)
Multi Picture Mode (continued)
2-picture mode (continued)
4. To switch to 4-picture mode, press
The 4-picture mode is displayed on the screen.
NOTE
Each time button is pressed, the picture mode will be switched by following order.
2-4-12
2-Picture 2-Picture (1080i)*
* When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))
which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.
5. To EXIT from the Multi Picture mode, press
Next time you press

4-picture mode

You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.
NOTE
The audio comes out ONLY from side A.
You can change the channels or change Input modes on the side with ▼ (red triangle) mark.
1. To switch the ▼ location
Press button on the remote control.
The ▼ mark will shift to side A and side B back-and -forth.
2. To change the channel
Make sure that ▼mark is located on the side you want to make changes.
+
Side A: Press button to select channels.
P
-
Side B: Select the frame (B1~B3) that you want to make changes
with button. The characters of selected frame will be highlighted in green.
+
Press button to select channels.
P
-
3. To change Input mode
Make sure that ▼mark is located on the side you want to make changes.
Side A: Press Input Select buttons on the remote control.
Side B: Select the frame (B1~B3) that you want to make changes
with button. The characters of selected frame will be highlighted in green.
Press Input Select buttons on the remote control.
button once.
2-4-12
4-Picture
button.
button to activate the Multi Picture mode, it will start from 2-picture mode.
12-Picture (TV mode only)
The selected picture with red triangle mark
AV1
AV2
(Sub-
screen)
[2-Picture (1080i) Mode]
5 B1 8
B2 6
A
B3 11
57