Setting The Ipod Control; Playback; Searching For A Desired Song - Alpine CDE-147BT Manual

Setting the iPod Control

When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Press and hold ENTER/OPTION for at least 2 seconds
during iPod source.
The Option menu for iPod mode is activated.
2
Turn the Rotary encoder to select APP DIRECT, and then
press ENTER.
The iPod control mode will switch between iPod MODE and HU
MODE.
HU (HEAD UNIT) MODE:
Operate the iPod/iPhone via this unit.
iPod MODE:
Operate the iPod/iPhone using its own controls. When iPod MODE is
selected, some functions will not be operable via the head unit.
Notes
• During HU MODE, you can switch to iPod MODE directly by pressing
BAND.
• Once the control mode is changed, this will set pause status, press 
to continue.
• Depending upon the iPod used, iPod MODE may not be selectable. Or,
if iPod is selected, operation must still be from the head unit.

Playback

1
Press VSOURCE to switch to the iPod source.
2
Press  or  to select the desired song.
Pressing and holding  or  will fast backward/fast
forward the current track.
3
To pause playback, press .
Pressing  again will resume playback.
Notes
• A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing  or .
• An episode may have several chapters. The chapter can be changed by
pressing  or .
38
-EN

Searching for a desired Song

An iPod/iPhone can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook/Genius Mix
List search mode to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2
Playlist Song
* *
Artist Album
*
Album Song
Song —
Podcast Episode
* *
Genre Artist
* *
Composer Album
Audiobook —
Genius Mix List —
For example:
Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press ENTER to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST search
mode, and then press ENTER.
*1
 PLAYLIST  ARTIST  ALBUM  SONG 
SHUFFLEALL
PODCAST  GENRE  COMPOSER  AUDIOBOOK 
*2/*3
 SHUFFLEALL
GENIUS MIX
Refer to "Random Play Shuffle (M.I.X.)" on page 40.
Depending on the connected iPod/iPhone, Genius Mix function
may not be supported.
When an iPod/iPhone with Genius Mix List created by iTunes is
connected to this unit, GENIUS MIX search mode can be used
to search a Genius Mix List.
Note
• The display of search mode list varies depending on the setting of IPOD
LIST. For details, refer to "iPod/iPhone Search Mode Setting" on
page 29.
3
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
4
Turn the Rotary encoder to select the desired Album, and
then press ENTER.
5
Turn the Rotary encoder to select the desired Song, and
then press ENTER.
Notes
• This function is unavailable when iPod MODE is selected in "Setting
the iPod Control" (refer to "Setting the iPod Control" on page 38). And
"iPod CONTROL" will be displayed.
• After pressing and holding ENTER for at least 2 seconds while in
each hierarchy (except SONG, AUDIOBOOK and GENIUS MIX List
hierarchy), all songs of the selected hierarchy are played back.
• Playback [ALL] is only applicable for those categories marked with " ",
press and hold ENTER for at least 2 seconds to play back all songs
in the iPod/iPhone or selected search mode.
• If no operation is performed for 60 seconds, the search mode is canceled.
• In the search mode, pressing t will return to the previous mode.
Hierarchy 3 Hierarchy 4
— —
Song —
— —
— —
— —
*
Album Song
Song —
— —
— —