Setting The Ipod Control; Playback; Searching For A Desired Song - Alpine CDE-W235EBT Owner's Manual

• Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
About iPod/iPhone models usable with this unit
Confirmed devices regarding Made for iPod. Correct function of
•
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.4.3
iPod nano (6th generation): Ver.1.0
iPod touch (3rd generation): Ver.4.3
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80 GB, 160 GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1
• Confirmed devices regarding Made for iPhone. Correct function of
earlier versions cannot be guaranteed.
iPhone 4: Ver.4.3
iPhone 3GS: Ver.4.3
iPhone 3G: Ver.4.2.1
iPhone: Ver.3.1.3
• For clarity in identifying your model of iPod, please see Apple's own
document "Identifying iPod models" at
http://support.apple.com/kb/HT1353
• This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable.

Setting the iPod Control

When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Press and hold s/ENTER/OPTION for at least 2 seconds in
the iPod mode.
The Option menu for iPod mode is activated.
2
Turn the Rotary encoder to select IPOD CONT, and then
press s/ENTER.
The iPod control mode will switch between IPOD MODE and HU
MODE.
HU (HEAD UNIT) MODE:
Operate the iPod/iPhone via this unit.
IPOD MODE:
Operate the iPod/iPhone using its own controls. When iPod is
selected, some functions will not be operable via the head unit.
Note
• Once the control mode is changed, this will set pause status, press q to
continue.
Depending upon the iPod used, iPod control may not be selectable. Or, if
•
iPod is selected, operation must still be from the head unit.

Playback

1
Press SOURCE/ C to switch to the iPod mode.
2
Press w or e to select the desired song.
Pressing and holding w or e will fast backward/fast forward
the current track.
26
-EN
3
To pause playback, press q.
Pressing q again will resume playback.
Note
A song playing on the iPod/iPhone while it is connected to this unit will
•
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing i or u .
• An episode may have several chapters. The chapter can be changed by
pressing w or e.
• During iPod/iPhone playback, press c, and then you can quickly
return to the hierarchy level selected last time in the search mode.

Searching for a desired Song

An iPod/iPhone can contain thousands of songs. The unit for this reason
can make various searches using the search function as shown below.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
Hierarchy 1 Hierarchy 2
Playlist Song
Artist* Album*
Album* Song
Song —
Podcast Episode
Genre* Artist*
Composer* Album*
Audiobook —
Note
You can select your preferred search mode. Refer to "iPod/iPhone Search
•
Mode Setting" on page 17.
For example:
Searching by Artist name The following example explains how an
ARTIST search is performed. Another search mode can be used for the
same operation, although the hierarchy differs.
1
Press s/ENTER to activate the search selection mode.
The "s" indicator lights up.
2
Turn the Rotary encoder to select the ARTIST search mode,
and then press s/ENTER.
SHUFFLE ALL s PLAYLIST s ARTIST s ALBUM s SONG s
*
PODCAST s GENRE s COMPOSER s AUDIOBOOK s
SHUFFLE ALL
Refer to "Random Play Shuffle (M.I.X.)" on page 27.
*
Note
• The display of search mode list varies depending on the setting of
IPOD LIST. Refer to "iPod/iPhone Search Mode Setting" on page 17.
3
Turn the Rotary encoder to select the desired Artist, and
then press s/ENTER.
4
Turn the Rotary encoder to select the desired Album, and
then press s/ENTER.
5
Turn the Rotary encoder to select the desired Song, and
then press s/ENTER.
Note
• After pressing and holding s/ENTER for at least 2 seconds while in each
hierarchy (except SONG and AUDIOBOOK hierarchy), all songs of the
selected hierarchy are played back.
Hierarchy 3 Hierarchy 4
— —
song —
— —
— —
— —
Album* Song
Song —
— —