Frequency Search Function; Receiving A Multicast Station (Hd Radio Mode Only); Multicast Station Search (Hd Radio Mode Only); Storing The Tag Information (Hd Radio Mode Only) - Alpine CDE-147BT Manual

Frequency Search Function

You can search for a radio station by its frequency.
1
Press ENTER in Radio mode to activate the search
mode.
2
Turn the Rotary encoder to select "F SEARCH", and then
press ENTER to enter the frequency search mode. *
Operation is not required when LISTENMODE is set to ANALOG
(refer to "Switching the listening mode" on page 28).
3
Turn the Rotary encoder to select the desired frequency.
4
Press ENTER to receive the selected frequency.
Notes
• Pressing t will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Receiving a Multicast Station
(HD Radio mode only)
Multicasting is the Ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
Note
• Make sure LISTENMODE is set to other than ANALOG (refer to
"Switching the listening mode" on page 28).
When multicast station is received, the program number
and the Multicast indicator lights up. Press  or  to
select the desired program service.*
Receiving the Multicast Station Program Service.
Program No.
Program Service example:
Multicast Radio
Program No.
Station
88.1 MHz
88.1 MHz
88.1 MHz
88.1 MHz
This operation can be performed only when MC SEEK is set to ON
(refer to "Setting the Multicast Seek" on page 28).
12
-EN
Multicast indicator
Program Service
1 Main Program Service
2 Sub-program Service
3 Sub-program Service
|
|
|
|
8 Sub-program Service
Multicast Station Search
(HD Radio mode only)
If a frequency has a Multicast station broadcast, the Multicast indicator
 lights up. Use the Multicast search mode to select a desired program
from the Multicast stations available.
Note
• Make sure LISTENMODE is set to other than ANALOG (refer to
"Switching the listening mode" on page 28).
1
Choose a frequency with the Multicast indicator  on.
2
Press ENTER to activate the search mode.
3
Turn the Rotary encoder to select MULTI CAST, and then
press ENTER to enter the Multicast search mode.
4
Turn the Rotary encoder to select the desired station, and
then press ENTER. The selected station is received.
Notes
• Press k VIEW at step 4. You can change the display between station
name, song name, artist name and program type.
• The search mode will be canceled if no operation is performed for 60
seconds.
Storing the tag information
(HD Radio mode only)
iTunes Tagging lets you tag songs heard on HD Radio stations. You can
preview, buy and download later, songs from your iTunes tagged playlist
the next time you sync your iPod/iPhone. If the unit is connected to a
Tagging compatible iPod/iPhone, you can use the iTunes Tagging
function. For details, refer to the Owner's Manual of the Tagging
compatible iPod/iPhone.
The m indicator will light when a song playing on an HD Radio
station has tag information available.
Press and hold k/Tag to save its tag information.
If no iPod/iPhone is connected, "TAG COUNTX" is displayed (X is
the total amount of the tag information stored in this unit).
Notes
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
• When the memory of iPod/iPhone is full, "iPod FULL" and "TAG
COUNTX" are displayed. The tag information will be stored to the unit.
• If the operation is failed, "CANNOT TAG" is displayed.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, "TAGCOUNT50" and "MEMORY FULL"
may be displayed.
• When an iPod that doesn't support the tagging function is connected,
"NON-TAGGING IPOD" may be displayed.
• When the iPod/iPhone is disconnected from the unit during tagging, its
tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information will
be transferred to the iPod/iPhone automatically. When the iPod/iPhone
memory becomes full, "iPod FULL" will be displayed, and any
remaining tag information on the unit will not be transferred to the
iPod/iPhone.
• If tag information already exists, "ALREADY TAGGED" will be
displayed when you try to tag information again.