Tuning Channels Using Presets; Storing The Desired Artist And Song Alerts; Receiving And Tuning To An Alert; Search Function - Alpine CDE-147BT Manual

3
Repeat the procedure to store up to 5 other channels onto
the same band.
Notes
• A total of 18 channels can be stored in the preset memory, 6 Channels
for each band (SXM1, SXM2 and SXM3).
• If you store a new channel into a preset which already has a channel
assigned, the current channel will be cleared and replaced with the new
one.

Tuning Channels using Presets

1
Press BAND to select the desired band of Presets you wish
to access.
2
Press the preset buttons (1 through 6) that has your
desired Satellite Radio channel stored in memory.

Storing the desired Artist and Song Alerts

While listening to SiriusXM Satellite Radio, you can be alerted when
your favorite songs or artists are playing on other channels. An
interruption ALERT will be displayed when a matching artist or song is
found on another channel. For receiving interruption ALERT
information, refer to "Receiving and Tuning to an Alert" on page 45.
1
Press and hold ENTER/OPTION for at least 2 seconds
when a Song or the song of an Artist you want to store is
playing.
The Option mode is activated.
2
Turn the Rotary encoder to select ALERT MEMO, and then
press ENTER.
3
Turn the Rotary encoder to choose SAVE ART? or SAVE
SNG? (when available), and then press ENTER.
Note
• If both the artist name and song title are not available to save,
UNAVAILABL will be displayed.
4
The new alert was stored in memory.
"ART/SONG SAVED" and "X U(sed)/ Y E(mpty)" are displayed.
X is the total number of song titles or artist names stored in
memory, and Y is the total number of memory locations still
available for storage.
Notes
• If you try to store when the memory is full, "MEM FULL" is displayed
followed by "REPLACE/CANCEL". If you want to replace an existing
alert item, select "REPLACE" by turning Rotary encoder, and then
press ENTER, the existing alert list stored in memory is displayed.
Select one of the stored alerts using the Rotary encoder. To replace the
selected alert, press ENTER and "ART/SONG SAVED" and "X
U(sed)/ Y E(mpty)" are displayed.
• You can manage the stored Alert memory setting on Setup mode, for
details, refer to "Managing Artist and Song Alerts" on page 43.
• If no operation is performed for 60 seconds, the setting mode is
canceled.

Receiving and Tuning to an Alert

Whenever a stored sports team, artist, or song is playing on another
channel, an interruption ALERT appears on the unit display. To tune to
the game, artist or song identified by the alert, follow the steps below:
1
Turn the Rotary encoder to select the desired game, artist
or song from the list of active alerts.
2
Press ENTER.
Notes
• If no operation is performed for 5 seconds, the unit returns to normal
mode.
• Sports teams/Artist name and Song title which you have stored and
which are currently playing will be displayed in a category called "MY
MUSIC"/"MY GAMES" in search mode. For details, refer to "Search
Function" on page 45.

Search Function

You can search for SiriusXM programming content by Category or by
Channel.
1
Press ENTER in the SiriusXM mode.
2
Turn the Rotary encoder to select the desired Category,
and then press ENTER.
3
Turn the Rotary encoder to select the desired Channel
Name, and then press ENTER.

Searching by Channel

1
Turn the Rotary encoder to select ALL CHANS after step 1,
and then press ENTER.
All Channels will be displayed in a list.
2
Turn the Rotary encoder to select the desired channel,
and then press ENTER to confirm.
Notes
• Press k VIEW, the information of the broadcasting channels will be
displayed. You can choose the desired channel from the artist name list
or song name list.
Each time you press k VIEW, the display changes as below.
Channel number  Channel name  Artist name 
Song name  Channel number
• During channel search, pressing 1  or  2 to select another Category.
45
-EN