Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Stations; Frequency Search Function - Alpine CDA-105 Quick Reference Manual

PreseUing Stations Manually
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, anyone of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM I, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Presetting Stations Automatically
1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location NO.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
Frequency Search Function
You can search for a radio station by its frequency.
1
Press and hold
~
lENT for at least 2 seconds in
Radio mode to activate Frequency search mode.
2
Turn the Rotary encoder to select the desired
frequency.
3
*
Press
~
lENT to receive the selected frequency.
*
Operation is 110t required during HD Radio reception.
• Press =:J/ESC in the search mode to cancel.
Or.
the search mode
will be canceled
if
110 operation is performedfor 10 seconds.
Receiving a Multicast Station (HD
Radio™ Reception) (HD Radio mode
only)
Multicasting is the Ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When multicast station is received, the program number
and the SPS indicator lights up. Press ... or ~ to select
the desired program service.
Receiving the Multicast Station Program Service.
BAND No. nr- , - , . . - _ - _ - _ -
M_UI_ti_C_8_St_N_O_._ SPS indicator
F1-3
c!lb
90.3MHz
1
Press BAND repeatedly until the desired band is
displayed.
2
Press anyone of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
8-EN
Program Service example:
Multicast Radio Station Program No.
90.3 MHz NO.1
90.3 MHz NO.2
90.3 MHz NO.3
I
I
I
I
90.3 MHz NO.8
Program Service
MPS: Main Program Service
SPS: Sub-program Service
SPS: Sub-program Service
SPS: SUb-program Service