Drive Parameter Settings Tables - Hitachi L100DN DeviceNet Series Addendum Read This First Manual

88
Appendix C:
Appendix C:

Drive Parameter Settings Tables

Introduction
This section lists the user-programmable parameters for the L100DN series inverters and
the default values, corresponding to Appendix B, "Drive Parameter Settings Tables," in
the L100 Inverter Instruction Manual. The right-most column of the tables is blank, so
you can record values you have changed from the default. This involves just a few
parameters for most applications. This section presents the parameters in a format
oriented toward the keypad on the inverter.
Parameter Settings for Keypad Entry
L100 series inverters provide many functions and parameters that can be configured by
the user. We recommend that you record all parameters that have been edited, in order to
help in troubleshooting or recovery from a loss of parameter data.
Inverter model
MFG. No.
Main Profile Parameters
"F" Group Parameters
Func.
Code
F_01 Output frequency setting
F_02 Acceleration (1) time setting
F_03 Deceleration (1) time setting
F_04 Keypad Run key routing
L100
–FE
Name
(Europe)
10.0
10.0
}
This information is printed
on the specification label
located on the right side of
the inverter.
Default Setting
–FU
(USA) (Japan)
0.0 0.0
10.0
10.0
00 00
User
–F
Setting
0.0
10.0
10.0
00