Table of Contents
Advertisement
LISTENING TO CD
5. To fast forward or fast rewind within the track, press and hold the TUN+ (
6. To pause the CD playback, press the CD PLAY / PAUSE (
GB
digits blink.
To resume CD playback,press the CD PLAY / PAUSE (
7. To stop CD playback, press the CD STOP (
playtime are shown on the display.
Note: Please make sure that the unit is on stop before you remove the disc inside the CD compartment
to avoid damaging the disk or the unit as well.
CD Repeat Modes
During the CD playback, you may select the different playmodes by pressing the P-MODE
(PLAY MODE) button on the remote control or you may open the SECONDARY CONTROL COVER
to access this function.
1. Press the P-MODE Button once and the (
This will repeatedly play the selected track until the repeat function is disabled.
2. Press the P-MODE button twice to Repeat ALL (
3. Press the P-MODE Button for three times to enable INTRO Playback and the INTRO icon will be
4. Press the P-MODE Button for four times to enable RANDOM Playback and the RND icon will be
a track from playing allows users to play the AUDIO CD in random order.
5. To cancel the repeat function, press the P-MODE Button until it is disabled from the screen. If the
STOP (
) Button is pressed, the CD play mode function will be cancelled.
Note: For MP3 disc format burned with directories, pressing twice the P-MODE Button will repeat
all tracks in a Single Directory. You can select other directories saved on the disc by pressing the
DIR+ / - / CH + / - Buttons.
CD Program Playback
This feature allows users to program for up to 20 tracks for Audio CD/60 tracks for MP3 CD and play
it in the desired order.
1. Open the SECONDARY CONTROL COVER
to access the MEMORY/ PROGRAM Button.
During CD stop playback, press the
MEMORY/PROGRAM Button once.
For Audio CD, the "00" (track number) and
"P-01" (program memory number) and "PGM"
indicators are displayed
on the screen. For MP3 CD, the "000" (track
number) and "P-01" (program memory
number), "01" (directory number) and "PGM"
indicators are displayed on the screen.
on the screen to determine that the unit is in
Program Mode.
2. Press the TUN + (
to select a track number to be programmed.
For MP3 CD, you may choose directories
by pressing the DIR+ / - / CH + / - Buttons and
select a directory then press the TUN + (
/ TUN - (
programmed.
The program number will advance by one.
To program up to 20 tracks, repeat steps 1 to 3 until all desired tracks are programmed.
4. To begin programmed playback, press the CD PLAY / PAUSE (
The"PRG" indicator is enabled on the screen and the CD starts the programmed playback.
5. To cancel programmed playback, press the STOP (
) / TUN - (
) Buttons
) Buttons to select the track to be
) Button and the CD playback-time
) Button again.
) button, The total number of tracks and total
) icon will be displayed on the screen.
ALL)the tracks available on the audio disc.
Audio CD display:
Track Number
MP3 CD display:
Track Number
Program Number
)
) Button.
) button or turn the unit off.
12
) / TUN- (
) buttons.
Program Number
Directory Number
Advertisement
Table of Contents
