Table of Contents
Advertisement
INTRODUCTION
Please read this instruction manual to learn about the features and controls of this unit.
FEATURES
- iPod®, iPod® Mini, iPod® classic, iPod® touch and 1st to 3rd gen. iPod® nano Player and
Re-charger. Five interchangeable iPod adapters included.
- CD player playback music with Audio CD, MP3 format.
- AM(MW) / FM Stereo receiver with digital read out on the LCD. FM antenna wire (included) for
better FM radio reception.
- Audio line-in for connecting other digital audio players. Stereo headphone jack connection for
private listening.
- Clock, Sleep and Alarm timer function.
- Wake up to Alarm (Buzzer), Radio, CD and iPod.
- 5 Equalizer Settings (Flat (EQ OFF), Rock, Jazz, Classic and Pop).
Computer Incorporated which is registered in the United States of America and other countries.
CARE AND MAINTENANCE
- Do not subject the unit to excessive force, shock, dust or extreme temperature.
- Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
- Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
the disc.
- Do not attach adhesive tape, stickers and etc. to the disc label.
- Clean the disc periodically with a soft, lint-free dry cloth. Never use detergents or abrasive cleaners
to clean the disc. If necessary, use a CD cleaning kit.
- If disc skips or gets stuck on a certain section, it is probably dirty or damaged (scratched).
- When cleaning the disc, wipe in straight lines from the center to the edge of the disc. Never wipe in
circular motions.
- To remove a disc from its storage case, press down on the center of the case and lift the disc out,
holding it carefully by the edges.
- Fingerprints and dust should be carefully wiped off on the disc's recorded surface with a soft cloth.
PREPARATION FOR USE
Remove all packing materials from the unit before use. Check all the accessories included on the
packaging namely:
- Main Unit
- Remote Control with 1xCR2032 battery
- Five Different iPod Adapters and a dust cover
- External FM Wire Antenna
POWER CONNECTION
This system is designed to operate on 230V AC 50Hz house current only.
Connecting this system to any other power source may cause damage to the system and such
damage is not covered by your warranty.
5
GB
Advertisement
Table of Contents
