Table of Contents
Advertisement
CLOCK AND ALARM SETTING
Year, Month and Date Setting
TUN+(
) / TUN-(
on the display. Press the TUN+(
VOLUME+/- Buttons to adjust the DAY. After setting the correct Month and Day, after 10
seconds, it will be saved automatically.
Alarm Setting
After setting the Clock, users can now set the Alarm Function of the unit.
During STANDBY Mode:
1. When the correct time is displayed, press the MODE button once and
the display will change from the current time to the alarm time. One of
the alarm icon (
) will be displayed from the screen.
2. The alarm display will start blinking and you may press the TUN + (
/ TUN - (
) Buttons to adjust the desired wake up HOUR. Pressing the
VOLUME + / - Buttons will adjust the alarm MINUTES.
3. When the display shows the desired alarm time, press the MODE Button
Buttons to select to the following wake up modes.
BUZZER (BUZ) / RADIO (RAD) / CD (CD) / IPOD (iPod)
and the alarm time is set. Press the ALARM ON/OFF Button to enable
or disable the alarm function.
Alarm to CD/Radio/iPod
1. Please make sure that a CD is placed, a radio station is tuned or iPod is inserted on the unit.
Check and adjust the alarm time setting if necessary and make sure that the desired alarm
source is selected.
2. Press the ALARM ON/OFF Button and the alarm(
3. When the alarm time is reached, the alarm source will be played immediately from a low volume
and eventually gets louder. The alarm source operation will be ON for 60 minutes.
4. To stop the alarm function, press the ALARM ON/OFF Button once to enable the alarm the next
day or press it twice to cancel the alarm function. The (
alarm settings.
Note: If no iPod is connected, the alarm will default to the BUZZER as its source.
Alarm to Buzzer
1. Check and adjust the alarm time setting if necessary and make sure that the (
2. Press the ALARM ON/OFFButton and the (
3. When the alarm time is reached, the buzzer will be played immediately. It continues for one
minute and then enters the "Auto Snooze" Mode.
After one minute, the buzzer will shut off for 9 -10 minutes and turn on again automatically. This
"Buzzer / Auto Snooze" cycle will be repeated for three times and will be cancelled on the fourth
alarm which will be repeated the next day.
4. To stop the alarm function, press the ALARM ON/OFF Button once to enable the alarm the next
day or press it twice to cancel the alarm function. The (
alarm settings.
Snooze / Light Operation
To temporarily dismiss the alarm function, you may press the SNOOZE/LIGHT Button. This will temporarily
dismiss the alarm function for 9-10 minutes before it will alarm again. This can be repeated for three times
and on the fourth time, it will automatically cancel the SNOOZE function and the alarm will be repeated
the next day. The other function of the SNOOZE/LIGHT Button is that upon pressing, the LCD light can
be activated or deactivated.
) Buttons to adjust year.
) / TUN-(
) Buttons to adjust the MONTH or press the
) icon is enabled on the display.
)
) icon is enabled on the display.
) icon will be disabled and cancel the
) icon will be disabled and cancel the
9
GB
) is select.
Advertisement
Table of Contents
