Motorola DCT6208 User's Reference Manual Page 10

Digital cable box.
Hide thumbs
Key
1
TO TV/VCR
2
CABLE IN
3
ETHERNET
4
AUDIO IN R
AUDIO IN L
5
SPDIF
6
VIDEO IN
VIDEO OUT
7
OUTLET
8
IR
9
USB
10
DVI-D
11
AUDIO OUT R
AUDIO OUT L
12
Y Pb Pr
13
TV PASS CARD
14
S-VIDEO
15
OPTICAL
SPDIF
16
IEEE 1394
8
17
POWER INLET
Description
This coaxial output connector is used to connect the DCT6208 to a TV or VCR
operating on channel 3 or 4.
The CABLE IN connector receives the incoming signal from your cable
service provider.
Not currently enabled - intended for future use.
These connectors are used to connect a set-top between a peripheral audio
device such as a CD player and a stereo tuner or A/V receiver. In the current
DCT6208 release, the audio from the peripheral device will pass through the
DCT6208 when it is turned off.
The orange coaxial SPDIF connector is a digital output connection that carries
Dolby Digital 5.1 audio or PCM audio.
It is used to connect the DCT6208 to a stereo tuner or A/V receiver to provide
surround-sound, theater-style audio.
The VIDEO IN connector accepts a baseband video input from a VCR, camcorder
or other video device. (Not currently enabled.)
The VIDEO OUT connector is used to deliver baseband video to an external device
such as a VCR or TV.
This AC outlet may be used to plug your TV into the DCT6208 as a convenient
additional outlet.
This connector enables the DCT6208 to control a VCR while recording a selected
program. Not all electronic program guides support this feature.
Not currently enabled - intended for future use.
Digital Video Interface. To connect High Definition monitor or High
Definition television.
The RCA phono-type connectors are used to deliver audio to a stereo receiver.
These connectors are used to deliver component video to an HD-ready TV or
monitor. Though capable of delivering standard definition video to your TV or
monitor, these cables are necessary to deliver High Definition video.
For future use.
This connector is used to deliver high quality, standard definition video to
external devices that accept S-Video inputs, such as a high-end VCR or TV.
The OPTICAL SPDIF connector is an optical digital output connection that carries
Dolby Digital 5.1 audio or PCM audio.
It is used to connect the DCT6208 to a stereo tuner or A/V receiver to provide
surround-sound, theater-style audio.
Firewall Digital Interface. To connect High Definition monitor or High
Definition television.
For the female end of the supplied power cord.
7 7

Advertising

   Related Manuals for Motorola DCT6208

This manual also for:

Dct2500, Dct2000

Comments to this Manuals

Symbols: 0
Latest comments: