EUROCOM M360C MILANO User Manual page 37

6. You can configure the settings by going to the Start
menu and pointing to Programs/All Programs and
clicking Intel Network Adapters, then clicking either
the Intel (R) PROset icon, or the options under the
Access Point Administration Tools.
Intel PRO/Wireless 2200BG (802.11b/g)
1. Make sure the module is powered on, then insert the
Intel PRO CD-ROM into the CD drive.
2. Click Install Software (button).
3. Click Next.
4. Click the button to accept the license and click Next >
Next > Install > Finish.
5. Click Start (menu), point to Settings and click Control
Panel (or just click Start > Control Panel).
6. Double-click System (icon); System (icon) is in
Performance and Maintenance (category).
7. Click Hardware (tab) > Device Manager (button).
8. Click "+" next to Other Devices (if its sub-items are
not shown).
9. Double-click Network Controller and click Reinstall
Driver (button).
10.When the Hardware Update Wizard appears, click
"Install from a list or specific location (Advanced)"
then click Next.
11. Select "Search for the best driver in these locations."
and select ONLY "Include this location in the
search:".
12.Navigate (Browse...) to D:\ProW2200\WINXP and
click OK > Next.
13.Click Finish.
14.An Intel Configuration Service control panel will
appear, and you can choose Yes to have Intel PROset
software to manage the wireless adapter.
15.A list of available networks will appear (click Finish to
exit the Wizard).
16.You can configure the settings by going to the Intel (R)
PROset for Wireless control panel (Start > Programs/
All Programs > Intel Network Adapters).
Concise User's Guide
Driver Installation - 31