EUROCOM LP200ST User Manual page 91

H U
ARDWARE PGRADES
5. If you want to increase system
memory by changing DIMMs, release
the levers on the two ends of the DIMM
slot. As you do so, the module will rise
slightly and remove the seated DIMM,
one DIMM at a time.
Contact Warning
Be careful not to touch the
DIMM's pins. Even the
6
cleanest hands have oils
which can attract particles,
and degrade the module's
performance.
System Memory Upgrade
6 – 4
Note for Windows 98 SE Hibernate Function
Users
: Once you increase system memory, you have to
check to see if your Hibernate-specific file is large enough
for the system to go into hibernation. It should be as large
as or larger than the size of your total memory. Refer to
Chapter 5, Drivers & Utilities, Windows 98 Second Edition,
Save to Disk (Hibernate) and Chapter 3, Advanced Controls,
Power Options in Windows 98 Second Edition for details.