Standby Mode; Enabling; Activating; Waking Up - EUROCOM LP200ST User Manual

A C
DVANCED ONTROLS
S
TANDBY
E
NABLING
By default, this function is enabled.
A
CTIVATING
You can use one of the following methods to put the system on standby. When the system is on
3
standby, the Power LED flashes in orange.
Manually
Method 1: pressing the Standby key.
Method 2: using the Shut Down dialog box (Start
> Shut Down...)
Method 3: pressing the power button (You first
have to designate the power button as
standby button as follows).
1. Go to Control Panel > Power Management
(icon) > Advanced (tab).
2. In the When I press the power button on my
computer list, click the arrow and select
Standby and then click Apply.
W
AKING UP
Press the power button and the system will restore to where it last left off.
Standby mode (Win98SE)
3 – 12
M
ODE
Automatically
The system will automatically enter Standby
mode after the preset time of system inactiv-
ity. To set the time,
1. Go to Control Panel > Power Management
(icon) > Power Schemes (tab).
2. In the System Standby list, click the arrow
and select the setting you prefer and then
click Apply.