Quick Start Guide; Overview - EUROCOM LP200ST User Manual

Q S
UICK TART
This quick start guide assumes that you're already familiar with LCD PCs and can tell at a
glance what and where all the key components are.
If you're not that comfortable with this sort of device, take a look at the following pages for an
overview of the system.
In any case, you should review these steps, before you take any action. If you aren't sure about
one of the procedures, check the relevant chapter before continuing.
Unless you have to install an operating system, your computer is ready to work right out of the
box.
But, before you begin, follow the safety instructions in the Preface, especially the instruction
on placement.
1. Remove all packing materials, CDs/DVDs,
floppy disks and any PC Cards.
2. Securely attach any peripherals you want
to use with the LCD PC (e.g. mouse and key-
board) to their ports. (See Fig. 1 - 8)*.
3. Attach the AC power cord to the AC-in port
on the computer's right side. Then plug the
AC power cord into an outlet.
G
UIDE
4. Push the power button to turn "on".
* Peripherals which connect to the USB
and (optional) IEEE 1394 ports can be con-
nected after Windows is up and running.
All other peripherals must be connected
before you turn on the system.

Quick Start Guide

1 – 5
1