Table of Contents
Advertisement
This manual contains information that is important for the proper setup and
maintenance of your touchmonitor. Before setting up and powering on your new
touchmonitor, read through this manual, especially Chapter 2, Installation and
Setup, and Chapter 3, Operation.
To reduce the risk of electric shock, follow all safety notices and never open
1
the touchmonitor case.
Your new touchmonitor is equipped with a three-wire, grounding power
2
cord. The power cord plug will only fit into a three-pronged safety ground
outlet. Do not attempt to fit the plug into an outlet that has not been
configured for this purpose. Do not use a damaged power cord. Use only the
power cord that comes with your Elo TouchSystems touchmonitor. Use of an
unauthorized power cord may invalidate your warranty.
The slots located on the sides and top of the touchmonitor case are for
3
ventilation. Do not block or insert anything to the ventilation slots.
4
It is important that your touchmonitor remains dry. Do not pour liquid into or
onto your touchmonitor. If your touchmonitor becomes wet do not attempt to
repair it yourself.
T
OUCHMONITOR
C
4
HAPTER
A
P P E N D I X
B
S
AFETY
B-23
Advertisement
Table of Contents
