Connecting The Cables To The Touchmonitor And Computer - Elo TouchSystems Elo Entuitive 3000 Series 2240L User Manual

Connecting the Cables to the Touchmonitor and Computer

Connector Panel on Rear Side of Monitor
Power Cable
Serial Cable
To connect your touchmonitor to your computer and power
source:
1
2
3
4
5
LED
Status
Power
Button
OSD
Remote
Control
Box
Connector
(Optional)
Connect one end of the power cable to the connector panel and
the other end to the power outlet.
Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other
end to your computer.
Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
Connect one end of the OSD remote control box connector to
the rear panel of the monitor and the other end to your computer.
Press the power button to turn the monitor on.
USB
DVI-D Cable
Cable
(not included
with some
European
models)
Elo TouchSystems 2240L User Guide
Analog Video
Cable
8