Step 4-Connecting The Power Cable - Elo TouchSystems Elo Entuitive 1749L Series User Manual

STEP 4-Connecting the Power Cable

AUTO/SEL DOWN UP M ENU
POWER
Depending on where you live, you will use either the European or US/Canadian
power cable.
• Connect the female end of the power cable to the
Connect the Brick power cable into the power port on the touchmonitor.
•
•
Route the cable through the cable management channel.
N : To protect your equipment against risk of damage from electrical surges in the power
OTE
line, plug the touchmonitor's power cord into a surge protector, and then connect the
surge protector to a grounded AC electrical outlet.
ET1749L shown (ET1746L does not have DVI-D connector)
POWER CABLE
Brick power supply.
2-11