STEP 4-Connecting the Power Cable
CONNECTIONS ON UNDERSIDE
POWER
Depending on where you live, you will use either the European or US/Canadian power cable.
•
Connect the female end of the power cable to the medical grade power adaptor.
•
Connect the brick power cable into the power port on the touchmonitor.
•
Route the cable through the cable management channel.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line,
plug the touchmonitor's power cord into a surge protector, and then connect the surge
protector to a grounded AC electrical outlet.
POWER CABLE
2-9