Setting Pos (Position Selector) - Eclipse AVN5510 Owner's Manual

Setting POS (position selector)

The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.

Touching the image of a seat
shown on the POS setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
OFF
• Touching
settings.
• After making settings, touch
return to the previous operation screen.
Touch switch
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page) and the Circle Surround II (page 41).
• The main unit is configured for vehicles with a left-side driver's position.
will cancel all
BACK
Function
Acoustics optimized for
driver's seat
Acoustics optimized for
passenger's seat
. The position will be saved and the system will
Touch switch Function
Acoustics optimized for
both front seats
Acoustics optimized for
rear seats
33