Eclipse AVN5510 Owner's Manual page 11

Resetting DSP (acoustics) levels
Default settings for the currently adjusted and saved DSP (acoustics) level can be reset.
OFF
Touch until a beep is heard.
The accoustic level will be returned to default value (the default value is "0").
When adjusting the level for the currently selected DSP (acoustics) mode, the
level will not be saved for other acoustics modes.
The description shown above is for explanation, and therefore it may differ from
the actual one on the same page.
Section heading
Only the section
heading will appear.
Attention
Additional points
regarding the
operations are given
here.
Go to the next page
The operation
procedures are
continued on the
next page.
11